Save your show file to the root directory of a USB thumb drive so you can reload it into the desk after completing the software update.
Download the ZerOS 8.0.0 software from the Varilite web site https://www.vari-lite.com/global/products/zeros-software
Insert the thumb drive into the desk, select Setup > Load > ZerOS > ZerOS-8.0.0.exe . There will be two warnings you will have to acknowledge, then the software update will load. After the update is complete you will be prompted to restart the desk.
After the desk has finished booting up, you will be prompted to update the Maths CoProcessor, there will be two warnings you will have to acknowledge, then the Maths CoProcessor will be updated. After the update is complete you will be prompted to restart the desk.
When the desk has finished rebooting, you will be given the option to turn off the Help window. Turn this off as it takes up a third of the desk touch screen.
Then go to Z key > Calibrate External Monitor and do the calibrate procedure.
Then go to Setup > Universes > Rigsync Disabled to turn off RDM.
Then load your show file. Go to Setup > Fixture schedule to see the status of the fixtures loaded in the show. White text means that they are in the current ZerOS Library, Pink means they are custom files or non library items and may need updating.
There are two warnings at the start of the software update. Once the software update has finished , you are prompted to restart the desk.
After the desk restarts, you will get a notice that the maths coprocessor needs updating and you have to accept the software licensing agreement.
There is an online ZEROS Manual https://www.zero88.com/manuals/zeros?filter=reset
Software Update Instructions from Varilite website
Introduction
Please familiarise yourself with these update instructions before proceeding. Instructions must be followed accurately and in order. Deviations or omissions could render the desk unusable and require it to be returned to the factory for recovery.
If any difficulties are encountered at any point, or you are in doubt on any of the instructions below, then do not proceed any further with the update and contact Vari-Lite for assistance.
The software installation process completely removes all data on the console, including any current show files. If the current show file is still required, please ensure that backups are taken before proceeding with the update. After completing the update, you may re-load your show if required.
When performing a software update it is important to ensure that the power supply to your desk is stable and reliable. Power loss during a software update can render your desk unusable.
Consoles running ZerOS 7.8.3 or later.
To perform the update:
– Download the software from the Vari-Lite website ( vari-lite.com/global/products/zeros-software )
– Save the .exe file onto a USB stick (don’t put it inside any folders)
– Plug the USB stick into your console
– Press SETUP to enter the console’s setup screen and choose “Load” on the monitor
– Select the file from the list displayed on screen and follow the onscreen instructions
– Once the update is complete, remove the USB Memory Stick and reboot the desk
Once all the software is up to date, you can get on with enjoying the new features in the desk software. Vari-Lite recommend printing these Release Notes and having them with you when operating the desk, as some functionality may have changed which is explained in these notes.
Page created 25 February 2025
There are two warnings at the start of the software update. Once the software update has finished , you are prompted to restart the desk.
After the desk restarts, you will get a notice that the maths coprocessor needs updating and you have to accept the software licensing agreement.